High-capacity 2 or 3 axes programmable automatic cutting machine
The CUTLAM®5.0 is a pedestal-mounted machine with an integrated recirculation/decanter tank. It represents the ultimate equipment in terms of high-capacity programmable automatic cutting machines. Power and advanced control of the cutting steps will guarantee first class efficiency and productivity.
/ Wheel and table movements
Fitted in standard with a Ø 355 mm wheel, which produces an automatic vertical and longitudinal movement. The automatic transverse movement is carried out by an optional cross-feed table.
Programming is performed via a large touch screen with a graphical interface that ensures you an intuitive use. Cutting parameters are continuously visible on the screen. Fast positioning of the cutting point is provided by the use of a joystick.
The internal memory allows you to store 300 programs that can be transferred via USB.
/ Easy programming
Depending on the location of the sample on the table, and on its
dimensions, the screen will indicate the various necessary and
possible moves in order to complete the cut. This data can then
/ All cutting modes are possible
– Automatic or manual cutting.
– Continuous automatic cutting with ingenious feed speed control:
The feed speed is pre-set, and will be automatically reduced if the load on the cutting wheel increases. The pre-set speed returns when the load on the screen decreases.
It improves the quality of the cut by limiting the thermal damages over the samples.
It is suitable for irregular samples and/or material with heterogeneous hardness.
It prevents the wheel from breaking in case of overload.
It allows you to work at maximum speed without any risk
– Automatic sequential cutting for maximum cooling.
– Plunge cutting, horizontal feed cutting and oscillating cutting.
– Repetitive parallel cutting
A high-capacity, independent cooling/recirculation system (140 litres) is located under the machine. The multipoint nozzles insure excellent cooling of the sample and the cutting wheel even during intensive use.
Fast cleaning is made possible thanks to an exterior shower head and a carefully designed cutting chamber.
The wide cutting table: W 408 x D 422 mm is composed of two independent parts. 4 longitudinal grooves and 6 transversal grooves that allow to fix all kind of clamping systems available as options or on the market.
|Wheel Ø||355 mm (400 mm optional)|
|Shaft Ø||25,4 mm|
|Standard flanges Ø||100 mm|
|Max cutting capacity||Ø 127 mm (with Ø 355 mm wheel) + opening on left|
and right hand side for long parts
|Passage under the wheel||252,5 mm (Ø 355 mm wheel)|
|Vertical movement||Z axis stroke 350 mm, speed from 0,1 to 25 mm/sec,|
speed advanced 50 mm/sec
|Longitudinal movement||Y axis stroke 350 mm speed from 0,1 to 25 mm/sec|
advanced speed 50 mm/sec
|Transversal movement||X axis stroke 120 mm (optional)|
|Lubrification||Recirculation system, 140 litres, on casters|
Cleaning system integrated, with a shower head
outside of the cutting chamber
|Motor power||5,5 kW|
|Rotational speed||Variable, from 1000 to 4000 rpm|
|Table||Treated aluminium and interchangeable stainless|
steel plate, W 408 x D 422 mm
|Type of groove||T-slots 12 mm (4 longitudinal, 6 transversal)|
|Protection||Cover with locking system|
|Body||Steel coated with epoxy paint|
|Pneumatic feeding||6 bars filtered 5 µ|
|Electrical power||12 kW combined|
|Electrical consumption||32 Ah|
|Voltage||400 Volts – 50 Hz (three-phase + ground)|
|Dim. W x H x D||877 (+ 600 mm with control panel) x 1727 x 1800|
mm (H. cover open 2272 mm)
|Reference||60 CT50A 00|
|Independent double vice (right and left)|
with fast tightening system, medium size
|60 CT400 20|
|Universal clamping vice 61||60 08128220|
|Motorised cross-feed table (X axis) stroke 120 mm,|
accuracy 0,05 mm
|60 CT501 00|
|Machine for cut-off wheel Ø 400 mm||60 CT503 00|
|Address||: 3 Seletar Aerospace Link,|
|Contact||: (65) 6778 8285|