Laboratory micro cutting machine Ø 150 mm
The CUTLAM®micro 1.1 is a LAM PLAN laboratory micro-cutting machine. Easy to use and economical. It is designed for precision cuts of the most sensitive materials.
The CUTLAM®micro 1.1 allows you to include a versatile and robust machine in your laboratory at a reasonable budget. Its speed range and cutting chamber capacity will enable you to use it for many applications with a variety of cutting wheels (diamond, AL203, etc.) up to 150 mm diameter.
The work piece is held by a vice-holding, the knob, located outside of the cutting chamber, which permits a micro metric movement of the Z-axis.
The cutting feed is controlled with a sliding weight system, allowing you to fine-tune the load applied for delicate and slow cuts.
|Wheel Ø||75 to 150 mm|
|Shaft Ø||12,7 mm|
|Standard flanges Ø||50 mm|
|Lateral arm displacement||Stroke 25 mm (accuracy 0,02 mm)|
|Preload weight||1 x 200 g|
|Lubrication/Cooling||Recirculation system, 10 litres, 800 L/ hour pump driven by the machine|
|Motor power||0,18 kW|
|Rotational speed||Variable, from 50 to 1500 rpm|
|Body||Steel coated with epoxy paint|
|Protection||Transparent cover with locking system|
|Voltage||230 V – 50 Hz single phase|
|Dim. W x H x D||390 x 390 x 340 mm|
(H cover open: 630 mm)
|Reference||60 CTM10 00|
|Recirculation coolant system, 10 litres|
|Cylindrical sample holder with clamping screw: Ø 12 to 50 mm maxi|
|Set of flanges Ø 50 mm for cut-off wheels Ø 125 to 150 mm|
Equipped with an independent decanting/ recirculation tank, you can easily make slow cuts in optimum conditions of cooling.
Based on a robust aluminium frame with a painted metal body, the CUTLAM®micro 1.1 is stable and vibration free. The hinged transparent hood avoids any spraying outside the machine and allows easy access for clamping vices on the arm. The hood is fitted with a safety device which stop immediately the cutting wheel
motor in case of an opening.
|Set of flanges Ø 35 mm for cut-off wheels Ø 75 to 100 mm||60 CTM01 10|
|Sample holder with multi screw clamping for irregular parts||60 CTM03 50|
|Sample holder vice with clamping screw: Ø 12 mm max||60 CTM03 30|
|V sample holder with clamping screw: Ø 24 mm maxi||60 CTM03 20|
|Sample holder double vice with clamping screw: Ø 12 mm max||60 CTM03 40|
|Cylindrical sample holder with clamping screw: Ø 12 mm to 50 mm||60 CTM03 10|
|Small vice with clamping screw: Ø 12 mm||60 CTM02 10|
|Address||: 3 Seletar Aerospace Link,|
|Contact||: (65) 6778 8285|