Singapore
Singapore Malaysia
MalaysiaConnect with us
From the group Cetim Corporate
© 2023 Matcor. All Rights Reserved. Web Design By Gwacamol
PRESSLAM®1.1
Easy-to-use, productive, automatic hot mounting press
The PRESSLAM®1.1 is a multi-purpose, easy-to-use, automatic hot mounting press that will allow you to achieve high production levels. All parameters are accessible via a 5.7” colour touch screen. The graphic interface guides you intuitively through the different settings, which you can then store and reuse at will. It is also possible to transfer predefined hot mounting parameters via the machine’s USB port. All phases are visible on the screen during the hot mounting cycle and can be modified at anytime. Each function can be adjusted separately and 4 pressurisation modes are available, along with a function reducing the amount of water used for cooling.
/ Technical Data
| Capacity | Ø 25,4 to Ø 50 mm |
| Heating system | 4 x 600 W around mould |
| Temperature range | 20 to 200°C |
| Heating cycle | 0 to 30 min |
| Cooling cycle | 0 to 30 min |
| Pressure | 0 to 1,600 daN |
| Double mounting | yes – all diameters |
| Program back-up | 300 with USB connexion |
| Pressurisation modes | 4 different modes |
| Chamber closing | half turned cover with a safety chamber |
| Mould changing | Quick, without connectors- electric or hydraulic |
| Pre-heating mode | Yes (cleared after 6 min without manipulation) |
| Water saving | yes (up to 25%) |
| Voltage | 230 V – 50 Hz single-phase |
| Pneumatic feed | 6 to 10 bars |
| Dimensions W x H x D | 250 x 680 x 470 mm |
| Weight | 72 kg (depending on mould size) |
| Reference | 60 PL110 00 |
Once put in service the PRESSLAM®1.1 runs a pre-heating cycle that is cleared after 6 minutes without user intervention.
Access to mould is wide open for a sample positioning and filling facility. Quick and effortless, the locking/unlocking is realised by a cover and a ¼ turn locking lever.
/ Exclusive safety device
The expulsion of the sample after the mounting cycle is only possible when the safety cover is located in its intermediary position. This device creates a safety chamber in which the sample is protected in case of an eventual sticking situation.
The PRESSLAM®1.1 is equipped with a main heating unit which contains the removable cylinder. The standard heating unit covers diameters from 25,4 to 40 mm and a specific element is available for a 50 mm diameter.
The mounting chamber can be changed without any tools, nor electric or hydraulic connections.
It only takes a few minutes to change the complete heating unit.
The PRESSLAM®1.1 is the ideal link in your mounted sample production line. It is a compact machine that is both easy to use and easy to maintain and will allow you to increase your productivity while maintaining unrivalled flexibility.
/ Accessories
| Heating unit for Ø 25.4 mm (1”), 30, 40 mm, 1”1/4 and 1”1/2 | 60 PL2H1 00 |
| Heating unit for Ø 50 mm and 2” | 60 PL2H2 00 |
| Assembly mould Ø 25,4 mm or 1” | 60 PL1C1 00 |
| Assembly mould Ø 30 mm | 60 PL1C2 00 |
| Assembly mould Ø 40 mm | 60 PL1C4 00 |
| Assembly mould Ø 50 mm | 60 PL1C5 00 |
| Assembly mould Ø 1”1/4 | 60 PL1C2 10 |
| Assembly mould Ø 1”1/2 | 60 PL1C4 10 |
| Assembly mould Ø 2” | 60 PL1C5 10 |
| Spacer Ø 25,4 mm or 1” for double mounting | 60 PL2I1 10 |
| Spacer Ø 30 mm for double mounting | 60 PL2I2 00 |
| Spacer Ø 40 mm for double mounting | 60 PL2I4 00 |
| Spacer Ø 50 mm for double mounting | 60 PL2I5 00 |
| Spacer Ø 1”1/4 for double mounting | 60 PL2I2 10 |
| Spacer Ø 1”1/2for double mounting | 60 PL2I4 10 |
| Spacer Ø 2” for double mounting | 60 PL2I5 10 |
| Compressed air filtration kit | 60 00375 90 |
| Cooling unit | 60 PL090 00 |
