SMARTLAM®3.0
Individual pressure semi-automatic polishing machine
With the SMARTLAM®3.0, LAM PLAN proposes an economic solution in terms of automatic pre-polishing and polishing of metallographic samples.
The SMARTLAM®3.0 is equipped with a new specific motorised head, composed with a 3 cells sample-holder and an individual pneumatic pressure system.
The moto reducer group has a high torque, the speed and the rotation can be set. The individual pneumatic pressure system handled by the electronic proportional valve, assures a great polishing regularity. The pressure applied per sample goes from 5 to 60 N.
The SMARTLAM®3.0 uses the reliable and proven base of the SMARTLAM®2.0 from which it conserves all the assets for a manual use (activation/deactivation of the sample holder head with the touch screen). The plate’s speed and rotation can be set from 20 to 650 rpm.
The automatic motorised head compactness is due to its strategically placed power supply on the side of the machine. The head rotates to free the workspace and allows the easy change of the polishing support and the cleaning of the plate and bowl.
/ Technical data of the machine
Plate Capacity |
Ø 200 to 300 mm |
Body |
Steel coated with epoxy paint |
Bowl |
Removable resin basin for easy cleaning |
Controls |
3,5“ touch screen to control the machine: start/stop,
timer, speed and direction of plate, water solenoid valve |
Plate rotation speed |
Variable from 20 to 650 rpm |
Rotation |
Clockwise / counter-clockwise |
Programming |
Loads 9 programs |
Connection |
Slave connector for dosing unit |
Water inlet |
Removable pipe with flow-rate adjustment
and safety solenoid valve |
Power max |
0,75 kW |
Voltage |
230 V – 50 Hz single-phase |
Pneumatic feed |
6 bars, filtered 50 µm |
Dimensions W x H x D |
580 x 570 x 670 mm |
Weight |
65 kg |
Reference |
60 SL220 00 |
All the functions accomplished by the machine or the head are controlled by the screen. The programs can be stored in the intern memory.
For more efficiency, you can connect the M.M. 909 M automatic dosing unit to your SMARTLAM® 3.0 and benefit of a very economic and competitive set.
/ Technical data of the head
Capacity |
3 samples Ø 25,4 to 50 mm
(on Ø 200 mm plate 3 samples Ø 30 mm max.) |
Body |
Steel coated with epoxy paint |
Controls |
Colour touch screen (3“):
controls the machine and the head |
Sample holder rotation speed |
Variable from 10 to 150 rpm |
Rotation |
Clockwise / counter-clockwise |
Pressure |
Individual, pneumatic, variable from 5 to 60 N |
Programming |
Loads 9 programs |
Power max |
Moto reducer with high torque |
Positioning |
Manual, with indexable handle |
Positioning and locking
in height |
Manual, raising/lowering of the head
with a lever, locking with knobe |
This product is already in quote request list